Canon Z90W User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Date and Time
Set the date and time.
I • Press the CC button to set
the date.
• Repeat steps 3 and 4 to set
all the date and time
settings
• If you press the IB3 button
and none of the date
settings blink, date setting
is complete
> Each time you replace the battery, the date display on
the LCD panel reverts to "......... When this occurs,
set the date and time.
• Each time the CC button is pressed, the number
increases by one If kept pressed, the number
increases quickly.
• If you press the CW button when is blinking, the
seconds display is set to zero.
■ If you do not perform any operation for about 10
seconds, the ▼ ihdicator goes off, and normal state
Is automatically entered. In that case, correctly
reperform the operations from step 1.
0-49