Mounting and detaching a lens – Canon EOS Rebel 2000 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting a Lens
Mounting and Detaching a Lens
Remove the rear lens cap and the
camera body cap.
Align the red dots on the lens and
camera and turn the lens as
shown by the arrow until it snaps
in place.
On the lens, set the focus mode
switch to AF.
• If the focus mode switch is set to
MF
(or
M
on older lenses), autofocus will
not operate.
• While the lens autofocuses, do not
touch the lens where it rotates.
Remove the front lens cap.
• Be careful not to lose the front and
rear lens caps.
Detaching the Lens
0
* AF
stands for Autofocus.
• MF stands for Manual Focus.
While pressing the lens release
button, turn the lens as shown by
the arrow until it stops. Then
remove the lens.
18