Multiple exposures – Canon EOS Rebel 2000 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
Multiple Exposures
A single frame can be exposed multiple times to obtain a special effect.
This is possible in the Creative Zone modes.
Press the Function button to point
the <►> arrow to the <Si> icon
on the LCD panel.
• “1" will be displayed on the LCD
panel.
Turn the <£2i> dial to set the desired
number of multiple exposures.
• The LCD panel will show the number
of multiple exposures.
• Up to 9 multiple exposures can be set.
•To cancel the multiple-exposure
setting, set the number of multiple
exposures to 1.
Compose the shot and press the
shutter button completely to take
the picture.
• After the first exposure, pressing the
shutter button halfway will have the < ► >
arrow (pointing to <B>) blink on the
LCD panel.
• After the set number of multiple
exposures are taken, the film advances to
the next frame and the multiple-exposure
setting is canceled.
• To cancel the multiple-exposure setting
before completing all the multiple
exposures, follow steps 1 and 2 to set the
number of multiple exposures to blank.
• The setting takes effect after any of
the following actions:
• The shutter button is pressed halfway.
• The Command Dial is turned.
• Six seconds elapse.
56