Unloading film, Qh midroll film rewind, 0il midroll film rewind – Canon EOS Rebel 2000 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading and Unloading Film
0
» With DX-coded film, the camera automatically sets the film's ISO speed.
• If the film is not DX-coded, set the ISO speed manually. See page 57.
II
' Infrared film cannot be used with this camera.
'The shutter curtains are manufactured with very
high precision. To prevent damage, never touch the
shutter curtains. When loading or unloading film, be
careful not to touch the shutter curtain with your
fingers or the film.
Unloading Film
After the film’s last frame is exposed, the camera rewinds the film
automatically.
When the film rewind ends, the camera
will make a shutter-release sound and
the <(§)> icon will blink on the LCD
panel. Before opening the camera
back to unload the exposed film, make
sure the icon is blinking.
QH Midroll Film Rewind
To rewind the film before reaching the last frame, follow the steps below.
1
2
Press the <Qii> button.
• The film will start rewinding. The
operation will then be the same as
normal film rewind.
Open the camera back and
remove the film.
21