Focusing point seiection, Focusing point selection – Canon EOS Rebel 2000 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing Point Seiection
The focusing point is shown as a little box. The focusing point can be
selected automatically or manually. In the Full Auto, Programmed Image
Control modes, and
<A'DEP>
mode, the focusing point is selected
automatically. In the
<P>, <Tv>, < Av>,
and
<M>
modes, the focusing
point can 'oe selected automatically or manually.
Automatic selection; The camera selects the focusing point automatically.
Suited for snapshots.
Manual selection: You can select any one of the seven focusing points
to achieve focus. It is convenient when you want to
make sure the target subject is focused or when you
want to retain the off-center framing of the subjeot.
Press the <Ehl> button.
• The selected focusing point will be
displayed.
• The focusing point will be displayed
and effective for about 6 sec. after
the button is released.
Turn the <iSi> dial to select the
desired focusing point. When the
dial is turned, the focusing point
selection shifts in the ioop shown
below:
Automatic
selection
’ Manual selection -
L
[..S..]-[.
] - [ ■
] - [
" ] - [
.
] - [
_ ] - [
■ ] - [ I ]
38