Canon EOS Rebel 2000 - Manual (Page 54)

'Щл
Auto Exposure Bracketing (AEB)
-2i1i»i1i2*
-2i1i»i1i2*
I
- 2 , 1 . » , 1 . 2 *
I
: Correct exposure
: Underexposure
; Overexposure
Take the pictures.
• The viewfinder and LCD panei wiii
dispiay the respective exposure ievel for
each bracketed shot.
• During AEB shooting whiie the exposure
ievei is dispiayed, the arrow pointing to
the AEB icon on the LCD panel will blink
along with the exposure level index.
• AEB is not canceled automatically. To cancel AEB, set the bracketing amount to 0.0.
• If the self-timer is used, the three AEB shots wiil be taken in continuous succession
automaticaily.
• If the Command Dial is set to a Basic Zone mode, AEB will be canceled automatically.
• If flash is used, AEB cannot be executed.
• In the continuous shooting mode, holding down the shutter button will take all three
bracketed shots continuously. However, the respective exposure level will not be displayed.
• AEB can be used in combination with exposure -
2
,i.t.i.
2
-
compensation. If the bracketing range exceeds -
2
,'.J.!,
2
*
the displayable range, the display will be as '
shown on the right (with a sample AEB amount ::
1
аордЕв.т.|И
1
!реч>^е
1
сярвтаз
1
ол.
of ±1 stop). 'J't
: AEB amount o( ¿1 stop.
: :l sxpASKitf-Vstcpei^osu’ecompe'tsalm
: it step AEB s№-2-stcpeip»;reccmpens3tcn.
'!)) Silencing the Beeper
The beeper can be silenced in all of the picture-taking modes.
Press the Function button so that the
<►> arrow points to the <»il)> icon.
• The frame counter on the LCD panel
will display “1.”
Turn the < ¿Si > dial so that the LCD
panel displays “0.”
• To enable the beeper again, turn the
< ¿Si > dial so that “1 ” is displayed.
• The setting takes effect after any of
the following actions:
• The shutter button is pressed halfway.
• The Command Dial is turned.
• Six seconds elapse.
54