Checking the battery level, Turn the command dial to a shooting mode, Battery life – Canon Rebel Ti 300V User Manual
Page 15: With 24-ex rolis)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Turn the Command Dial to a
shooting mode.
• The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
:
Battery level OK.
HE
: The battery level is low. Keep
1
spare batteries handy.
[5S
ti
]
cm-
: The batteries will soon be
completely exhausted.
H3
: Replace the batteries,
(^page 5)
Battery Life
Temperature
0% Flash Use
50% Flash Use
100% Flash Use
At 20'C
67 rolls
30 rolls
22 rolls
At-10"C
44 rolls
20 rolls
15 rolls
I
(With 24-ex rolis)
The battery life shown in the table is based on the Canon's testing
conditions with new batteries.
If nothing is displayed on the LCD panel, the batteries may have been
installed incorrectly. Take out the batteries and install correctly (-»page 14)
Pressing the shutter button halfway tor a prolonged period or operating only
the autofocus without taking a picture will still consume battery power. It will
reduce the number of rolls that can be taken with the batteries.
When not using the camera, set the Command Dial to <6® =
15