Automatic af point seiection, Select the desired af point, Selecting an af point – Canon Rebel Ti 300V User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EE)
Selecting an AF point
The AF point is used for focusing. The AF point can be selected auto
matically by the camera or manually by you. In the Basic Zone modes
and <A-DEP> mode, the AF point selection is automatic only. In the <P>,
<Tv>, <Av>,
and
<M>
modes, the AF point can be selected either
automaticaliy or manually.
Automatic AF point Seiection
The camera selects the AF point automatically according to situation.
Manual AF point Selection
You can select any of the seven AF points manually. This is best when you
want to be sure to focus on a particular subject, or to use the time of the
AF function to help you compose a particular shot quickly.
Press the <
EB
> button. ((S6)
► The current AF point will light.
Select the desired AF point.
• While looking at the AF points on the
LCD panel or in the viewfinder, turn
the <iSi> dial to select the desired
AF point. The selected AF point will
flash in the viewfinder. The AF point
selection will change in the looping
sequence below.
• After selecting the AF point, press
the shutter button halfway. The
camera will then be ready to take
pictures.
Automatic AF
Point Selection p
Manual AF
Point Selection ~
c
[■■■■■{«-»[i H'M'C« I
1
«C '
■ I
1
*^C . Il-^C
!l
I]
32