Canon Rebel Ti 300V - Manual (Page 50)

Using the Built-in Flash
Flash Distance Range (With EF 28-90mm f/4-5.6)
ISO
28mm 90mm
Negative Film Slide Film Negative Film Slide Film
too m / ft 1 -4.2/3.3- 13.1 1 - 3 0 / 3 3 - 9 8 1 - 3 0 / 3.3 -9.8 1 -2.1 /3.3-6,3
400 m / ft 1 - 8 5/3.3 - 27.9 1.2-6.0/3.9-29.5 1 -6.0/3,3-197 1 - 4 . 3 / 3 3 - 14.1
• When using the built-in flash, stay at least 1 meter/3.3 feet away from the
subject. Otherwise, part of the photo will look dark
' When using the built-in flash, detach any hood attached to the lens. A lens
hood will partially obstruct the flash coverage.
• When a super telephoto lens or a fast, large-aperture lens is attached, the
built-in flash coverage might be obstructed.
' To retract the built-in flash, push it down.
' The built-in flash’s flash coverage is 28mm lens angle
' If more light is required, use an external, EOS-dedicated Speedlite (optional)
ISO:Setting the ISO Film Speed
If the film is not DX-coded or if you want to set a different film speed,
you can set the film speed manually after loading the film into the cam­
era. The settable film speed range is ISO
6 to 6400.
Move the < ► > arrow to the < ISO >
icon.
• Look at the LCD panel and press the
< FUNC.
> button to move the arrow
( <
2
>
6
)
► The current film speed is displayed.
"y Set the desired film speed.
• Turn the </^> dial to set the film
s
50
speed.
The manually-set film speed will be canceled if the film is taken out and DX-
coded film is loaded.