57 7 >0 «5 30 ft, Tl2 3 5 looq m, U|2i 4 si i 11ii22 a – Canon A-1 User Manual
Page 19: Stopped-down ae, Ae flash, Manual override, Cum m * in« a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
57 7 >0 «5 30
ft
1.tL2
3 5 lOoQ m
I I I I I I. I I I I
cum M * in« a
:■ U|2I 4 SI I 11II22 A «
Stopped-down AE
1. Disengage the lens aperture
ring from the “A” mark
(necessary only on FD lens).
2. Fold and push in the stop-
down lever.
3.Set the aperture by turning
the lens aperture ring.
See pp. 61-62 for detailed
explanation.
AE Flash
1. Insert the Speedlite 199A,
177A, 155A or 133A into
the A-l’s accessory shoe.
2.Set the ASA film speed on
the flash.
3. Make sure the lens aperture
ring is set to “A”.
4. Set the auto working aper
ture on the flash.
5.Switch the flash on.
6. Wait for the pilot lamp to
light up and “F” to appear
in the viewfinder.
See pp. 83-85 and instruc
tion booklet for Speedlite
199A,
177A,
155A or
133A for detailed explana
tion.
-
1 1
-
Manual Override
1. Disengage the lens aperture
ring from the “A” mark
(necessary only on FD lens).
2.Switch the AE mode selec
tor to Tv.
3.Select a shutter speed by
turning the AT dial.
4. Select an aperture by turn
ing the lens aperture ring
(using the camera-selected
aperture in the digital read
out as a basis if so desired).
See
p.
65
for
detailed
explanation.