In the case of an fd lens which has a, Chrome breech-lock mount ring or of an fl lens – Canon A-1 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
In the case of an FD lens which has a
chrome Breech-lock mount ring or of
an FL lens:
Mounting
1. Make sure the Breech-lock ring is locked
so that it cannot be turned. It will not
mount onto the ctimera otherwise.
2. Align the red dot of the Breech-lock ring
with the red dot on the camera body
above the camera mount.
3. In this position, fit the rear of the lens
into the camera body and turn the
Breech-lock ring clockwise until it is
tight.
Dismounting
1. Turn the Breech-lock ring counterclock
wise until it stops.
2. Pull the lens out from the camera body.
Advertising