Mounting the speedlite – Canon Speedlite 420EX User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Mounting the Speedlite

Loosen the locking collar.

• Turn it as shown by the arrow.

Mount the 420EX onto the camera.

• Slide the 420EX's mounting foot aii

the way into the hot shoe.

Tighten the locking collar.

► Turn the locking coliar as shown by

the arrow. The mounting foot's

locking pin extends into the hot
shoe's locking pin hole.

• To detach the 420EX, turn the

locking collar in the opposite direction
until it stops. (The locking pin retracts
into the mounting foot.) Then slide

out the 420EX from the hot shoe.

o The hot shoe on the EOS 650, 620, 750, and 850 does not have a locking pin

hole. Although the 420EX can still be mounted on these cameras, be careful not

to have it slip off the hot shoe.

12

Advertising