Focusing point for fe lock with the eos 30/elan 7e – Canon Speedlite 420EX User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FE Lock

Recompose and take the picture.

• Focus the subject, check that the

< ‘f >

icon is lit in the viewfinder, then

take the picture.

The image has been removed due

to copyright restrictions

The flash exposure was locked on the

subject's face, then the picture was
recomposed. The subject was thereby
correctly exposed without the highly

reflective background throwing off the

correct exposure.

With FE lock.

Focusing Point for FE Lock with the EOS 30/ELAN 7E

Focusing Point Selection Method

Focusing Point lor FE Lock

Automatic

Center

Manual

With C.Fn-8-0.

Center

WithC.Fn-8-1.

User-selected

Eye Control

With C.Fn-8-0.

Center

WithC.Fn-8-1.

User-selected'

When you focus with Eye Control and press the FE lock button while pressing the

shutter button halfway, FE lock is applied at the selected focusing point. Also, if you

press the FE lock button without pressing the shutter button (before achieving
focus), FE lock is applied at the center focusing point.

41. If the subject is beyond the effective flash range [resulting in underexposure),

the <%> icon will blink.

Move closer to the subject or use a larger aperture and try FE lock again.

S

28

For FE lock, the preflash is fired at 1/32 output.

FE lock may not be effective for a very small subject.

Advertising