Canon EOS 5 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the camera cannot determine which AF
frame you are looking at:
1) “ 1> ” blinks in the viewfinder and the
camera automatically switches to auto
matic focusing point selection mode (refer
to page 26) to select the focusing point.
After focusing is completed, “ i> ” will
continue to blink in the viewfinder but it is
still possible to use the eye-controlled
depth-of-field check function. To return to
Eye Controlled Focus mode, remove your
finger from the shutter button and then
press it again halfway.
2) Different shooting locations can conceiv
ably change the state of your eye and af
fect Eye Controlled Focus operation.
When shooting in a location with a differ
ent light source, perform the calibration
procedure again at the calibration number
you are currently using (refer to page 16).
Each time a calibration is performed the
camera “learns” the different states of your
eye, improving the Eye Controlled Focus
operation.