Canon EOS 5 User Manual
Page 97
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* The bracketing amount is aiso dis
played in the viewfinder.
3) Set the command dial to the desired
shooting mode and take pictures.
• To cancel auto exposure bracketing, re
peat steps 1 and 2 to reset the bracketing
amount to 0.
• Auto exposure bracketing is automatically
canceled when the battery is replaced.
• Auto exposure bracketing cannot be used
in bulb mode or when using flash.
• Auto exposure bracketing can be used in
X mode or manual mode with flash units
connected through the PC terminal.
• The exposure level blinks in the LCD
panel and viewfinder display during auto
exposure bracketing operation.
If you wish to shift the bracketed exposure
values toward over- or underexposure, you
can add exposure compensation using the
quick control dial. In this case the LCD panel
may not display the correct values, but expo
sures will be made correctly.