Checking of batteries – Canon 518 Single -8 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
After the batteries have been loaded, check the
power level of the batteries. Press the battery
test buttons at the bottom of the camera, and
check the position of the needle seen in the
battery tester window.
1
For checking the mercury batteries, press the
'
white button. If the needle is in the blue zone
the batteries have sufficient power level. Other
wise, the mercury batteries must be replaced.
Checking of Batteries
Turn the knob
alter closing the cover.
5
Advertising