Canon E 230 User Manual
Canon
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Canon
- 8mm VIDEO CAMCORDER
- Table of Contents
- Camera Parts and Functions
- WL-50 Wireless Controller
- CAMERA and PLAY Modes
- Viewfinder Displays
- Power Sources
- Using Battery Pack
- BP-E77Kim/BP-E722 (option) 130 Battery Pack
- Attaching Battery Pack |^]
- 1. Slide battery pack into power source compartment.
- 2. Press battery pack until it clicks and locks in place.
- Removing Battery Pack
- 1. Slide and hold ВАТТ EJECT switch up.
- 2. Pull battery pack out, as shown.
- Charging Battery Pack
- CA-100 Compact Power Adapter
- CB-110 Car Battery Adapter (option)
- Attaching DC Coupler iEKl
- 1. Insert DC-100 DC Coupler into power source compartment.
- 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
- Setting Date and Time
- 1. Turn camera on by pressing OPERATE button.
- 2. Press and hold SET button for more than 3 seconds. BQ
- 3. Press + and - buttons to scan year display.
- 4. Press SHIFT button when correct year is shown.
- 5. Press + and - buttons to scan month display.
- 6. Press SHIFT button when correct month is shown.
- 7. Press + and - buttons to scan day display.
- 8. Press SHIFT button when correct day is shown.
- 9. Press + and - buttons to scan hour display.
- 10. Press SHIFT button when correct hour is shown.
- 11. Press + and - buttons to scan minute
- display.
- 12. Press SET button when correct minute is shown.
- Camera Preparations
- Csmera Rocording (camera Mode)
- 1. Attach power source.
- 2. Turn camera on.
- 3. Press EJECT button.
- 4. Load video cassette and close video cassette compartment.
- 5. Press SP/LP button to select tape mode.
- 6. Turn grip to desired position.
- 7. Press start/stop button.
- 8. Press start/stop button again to temporarily pause recording. ИДЯ
- 9. When recording has ended, press EJECT button.
- 10. Remove video cassette and close video cassette compartment again.
- 11. Turn camera off.
- Video cassette erasure prevention switch IcggI
- Tape Counter
- Recording Reminder
- Video Cassette Warning з2-а
- Battery Pack Warning 32-в
- About Backlighting 32-c
- Recording Using Tripod 32-D
- 1. Place camera in record pause mode.
- 2. Press + or - button to scroll forward or backward to locate recording start position.
- 3. Press start/stop button.
- Record Review (camera Mode)
- 1. Place camera in record pause mode. Kgra
- 2. Press © button.
- 3. Press start/stop button to resume recording.
- Record search (to resume recording) B5gl
- Record review IcHSl
- Recording Date and Time (camera Mode)
- 1. Place camera in record pause mode.
- 2. Press DATE button to select display for recording as follows:
- 3. Make your recording as normal.
- Autofocus
- N Subjects Not Suitable for Autofocus
- 1. Press AF/MANUAL button to select manual focus.
- 2. Rotate zooming lever to telephoto end.
- 3. Look through viewfinder and rotate focusing ring to focus on subject.
- 4. Use zooming lever to frame subject properly.
- Macro RGCOrding (camera Mode)
- 1. Press AF/MANUAL button to select manual
- focus.
- 2. Rotate zooming lever to wide-angle end.
- 3. Press and hold macro button on zooming lever and move lever into macro range.
- 4. Approach subject to desired size in viewfinder.
- 5. Use zooming lever within macro range for fine focusing.
- 6. When macro recording is completed, reverse steps 2 and 3.
- Zooming (CAMERA Mode)
- Power Zoom 41-a
- Manual Zoom 4i-b
- Wireless Zoom 4i-c
- WhitG BalanCG (camera Mode)
- What Is White Balance?
- Auto White Balance
- Subjects Not Suitable for Auto White Balance 42-a
- White Balance Lock
- White Balance Lock Procedure
- Point camera lens at a white object (such as a sheet of paper) for 10 seconds, so it completely fills viewfinder.
- 2. Press AWB/LOCK/GAIN UP button.
- 3. Make your recording.
- 4. Press AWB/LOCK/GAIN UP button again to reset auto white balance.
- Shooting with Video Light (CAMERA Mode)
- Attaching Video Light 44-a
- 1. Insert video light plug into accessory shoe on the camera.
- 2. Slide video light into accessory shoe until it stops.
- Removing Video Light 44-b
- 1. Press and hold lock release button.
- 2. Slide video light out of accessory shoe.
- 1. Rotate the protector in the indicated direction.
- 2. Puii out the oid buib.
- 3. Insert a new bulb positioning the notch at the bottom.
- 4. Rotate the protector in the indicated direction.
- 1. Point camera at subject and compose scene in viewfinder.
- 2. Press SHUTTER button.
- 3. Make your recording.
- 4. Press SHUTTER button to return to normai shutter speed.
- 1. Press and hold FADE button during recording.
- 2. Press start/stop button when scene has disappeared compieteiy.
- 3. Reiease FADE button.
- 4. Press start/stop button to start recording.
- 5. Press start/stop button again to stop recording.
- Adding Titles to Recordings (camera Mode)
- Creating Character Titles
- 1. Place camera in CAMERA mode.
- 2. Press SET button to display title lines in viewfinder.
- 3. Press SHIFT button to move the cursor to position where you want to start the title.
- 4. Use + and - buttons to scan list of title characters.
- 5. When the character you want is displayed, press SHIFT button again to move to next cursor position.
- 6. Follow steps 4 and 5 until your title is complete.
- 7. When the title is finished, press SET button.
- 2. Press C. TITLE button to select the type of scrolling you want:
- 3. Press SET button.
- Recording Titles
- 1. Place camera in record pause mode. ЕДЯ
- 2. Press start/stop button to start recording.
- 3. Press C. TITLE button.
- 4. Press C. TITLE button again to end title recording.
- Playback Connection (PLAY Mode)
- Using TV with Audio/Video Inputs
- Connection Procedure вта
- Using TV with SCART Terminai
- Connection Procedure Baa
- B niale
- Selecting Video Channel (European model)
- 1. Turn TV on.
- 2. Turn camera on.
- 3. Press MODE SELECT button to select PLAY mode.
- 4. Press >■ (PLAY) button to start playback.
- 5. Set RF unit’s G/l selector using flat-edge screwdriver.
- 6. Set TV and video channel selector to video channel (video channel selector is factory-set to CH 32).
- Playback Procedure (PLAY Mode)
- (■«I |M-)t
- 1. Turn camera on.
- 2. Press MODE SELECT button to select PLAY mode.
- 3. Press EJECT button.
- 4. Load video cassette in camera and close video cassette compartment.
- 5. Locate playback start point.
- 6. Press ^ (PLAY) button to start playback.
- 7. Press ■ (STOP) button to end playback.
- 8. Turn camera off.
- PLAY Mode
- High-Frequency Feedback
- Special Playback Methods (PLAY Mode)
- A. Fast Forward Playback
- B. Rewind Playback
- C. Still Playback
- D. High-Speed Search
- Tape Return (play Mode)
- 1. When you locate a scene during playback that you want to watch again later, press COUNTER RESET button.
- 2. Press ■ (STOP) button when playback finishes.
- 3. Press TAPE RETURN button.
- 4. Press >■ (PLAY) button.
- Editing to Another VTR (PLAY Mode)
- Canon E230 Video System Chart
- Carrying Cases
- Optional Accessories
- Problems and Troubleshooting
- Condensation (DEW)
- Cautions
- During Use
- F. Always Replace the Lens Cap.
- G. Do Not Expose the Camera to Shock or Vibrations.
- H. Avoid Sudden Changes in Temperature.
- I. Do Not Disassemble the Camera.
- J. Using the Battery Pack and Recommended Accessories.
- Using Your Battery Packs Effectively
- Immediately After Purchase
- General Use
- storage
- Terminology
- Keep the Heads Clean.
- Clean the Camera with a Soft, Dry Cloth.
- Store the Camera Properly.
- Store Cassette Tape Properly.
- Check the Operation of Each Component.
- Specifications
- Canon