Press start/stop button to start recording, Press start/stop button again to stop recording – Canon E 230 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10 SEC
4. Press start/stop button to start recording.
• Selected mode appears in viewfinder.
For self-timer recording:
bctu
• Countdown 10-1 appears, followed by:
Recording reminder display (SELF recording)
Countdown 30-1 display (SELF 30 recording)
• Tally lamp flashes slowly during standby and flashes
rapidly when recording starts.
• Recording starts automatically after countdown.
For Interval timer recording: ^30
• After selected mode appears in viewfinder, standby and
recording (about 0.5 seconds) are alternately performed.
• Tally lamp flashes slowly during interval timer recording.
5. Press start/stop button again to stop recording.
• Camera goes into record pause mode.
Notes:
• Press the start/stop button to cancel self-timer recording during countdown.
• As a power source for interval timer recording, the CA-100 Compact Power Adapter or CB-110 Car
Battery Adapter are better suited for the lengthy recording time that may be required.
• The camera will automatically turn off after about 6 hours of interval operation in order to protect
camera parts from damage.
• Noise occasionally may occur at intervals.
• Use only SP mode for interval timer function.
55