Salter Brecknell 7620U - Manual (Page 15)

Model 7620U Bench Scale User’s Manual 15
Configuration Mode
Configuration
(CONFIG) Mode
18. Press the F1 key to stop the test.
19. When you are finished with the test, press
the ZERO key, until “DONE” is displayed.
Press the F1 key, or place Switch 1 back to
normal mode to return to normal weighing
mode.
The Configuration (CONFIG) mode menu lets
you configure your scale to your specific applica-
tion needs. The items you can configure are as
follows:
Filter (FILTER) – Choose from “FLTR ON” OR
“FLTR OFF.” Default is “FLTR ON.” In a stable,
vibration free location, the “FLTR OFF” setting
could be used if quicker display response is
desired.
Baud (BAUD) – Choose one of the following
baud rates: “1200, 2400, 4800, 9600, and
19200.” Default is “9600.”
Parity (PARITY) – Choose from: “NONE, EVEN,
or ODD.” Default is “EVEN.”
Protocol (Prot) – Choose communication
protocol: “NCI STD” for standard NCI protocol,
“H-100” for 100 times displayed resolution using
the “H” command, “7611” for Canada Post-
ROSS , or “NCI SMA” for Scale Manufacturers’
Association Standard for Scale Serial Communi-
cations. Default is “NCI STD.”