BoonDocker POLARIS: 2011-14 PRO RMK 800 Intercooled - Manual (Page 4)

Revised 10/22/2014 Page 4 of ?
www.boondockers.com………………..... ……….………………....877-522-7805
13. 14. Attach the rubber exhaust mounts to turbo
Bracket as shown .
Note : 2011-12’ are different
than 2013’.
15. Hang the turbo assembly in place using the
stock muffler mounting locations, make sure
turbo sits down on rubber mounts. 16. Lower coolant level in bottle, remove stock
coolant line from coolant bottle to throttle bodies
Route the inside turbo coolant line to coolant bottle.
Proper routing will avoid pull rope, and sharp edges
17. Route outside coolant line over to the throttle
Bodies and secure using supplied hose clamps.
18.