Detex 01W Trim User Manual
Page 2
Advertising
DETEX INS-101272 Page 2
PREPARING THE DOOR:
1. Center punch hole “a” marked earlier.
2. Drill four (4) pilot holes “a”.
Caution: Be sure to drill STRAIGHT through the door.
3. Drill four (4) 3/8” holes partway through the door. Complete these holes by drilling from the op-
posite door face.
ASSEMBLING THE OUTSIDE TRIM AND BACKPLATE:
1. Align the four sex nuts and trim assembly through the drilled holes (Fig. T1).
2. It may be necessary to hammer the sex nuts into the door face.
3. Fasten the backplate to the inside door face with 1/4-20 machine screws provided.
Caution:
Do not overtighten.
4. Resume with panic hardware instruction #15.
Fig. T1
Advertising