Detex 03R Trim for 60 Series - Manual

TOOLS AND SUPPLIES
Safety Glasses
(Always put on safety glasses prior
to beginning installation of unit)
Pencil
Center Punch
Hammer
Power Drill
1-1/4" Hole Saw
Drill Bit & Tap Set
Screw Driver (Phillips Drive)
Tape Measure
Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045
(830)629-2900 / 1-800-729-3839 / Fax (830)620-6711
E-MAIL: [email protected] INTERNET: www.detex.com
104871 December 12, 2011
INSTALLATION INSTRUCTIONS FOR
03R ADVANTEX® TRIM FOR NARROW STILE (60 SERIES) CVR APPLICATIONS
Owner's Copy
Standard Builder's Hardware Rim
Cylinder sold separately*
p/n: ECL-445-X
p/n: 105210-X
Screws & lockwashers
provided with cylinder*
Tailpiece for 2-1/4"
thick door provided
p/n: 105239-1
Tailpiece assembly
for 1-3/4" to 2" thick doors
p/n: 105238-1
Trim housing
p/n: 105104-X
Hex standoff
p/n: 105105
Mounting screws
3 lengths provided (qty 2 each)
p/n: 105622-124 (1-1/2" long for 1-3/4" door)
p/n: 105622-128 (1-3/4" long for 2" door)
p/n: 105622-132 (2" long for 2-1/4" door)
Must use BP12
backplate
(supplied with exit device)
03R Trim for 60 Series
Concealed Vertical Rod Exit Device
60 / F60 / 61 / F61 / 62 / F62 / 63 / F63 Series
Drawing no. 105106
®
104871 Page 1