Detex 03R Trim for 60 Series - Manual (Page 2)

1. PREPARE THE DOOR - DEVICE SIDE
If not already done, prep the door per the
instructions provided with the exit device.
DEVICE (INSIDE)
FACE
OF DOOR
device vertical
(backset)
C
L
Transfer vertical (backset)
Position square as shown
to allow for door bevel
2. TRANSFER DEVICE CENTERLINES TO TRIM SIDE OF DOOR
C
L
Measure vertical (backset)
Position square as shown
to allow for door bevel
C
L
2a
2b 2c 2d
2e
3. PREPARE THE DOOR - TRIM SIDE
Next, prep the hole and slotted opening
shown at right for the trim per the
template (p/n 105285) provided with this trim.
(Template also available on Detex website
See template T2314)
device horizontal C
L
104871 Page 2