Detex 02W Trim User Manual
Page 4
Advertising
4. Align the four sex nuts and trim assembly through the drilled holes (Fig. T3).
5. With the key out of the cylinder, align the tailpiece extension into the backplate's trim cam on
the inside door face.
6. It may be necessary to hammer the sex nuts into the door face.
7. Fasten the backplate to the inside door face with 1/4-20 machine screws provided.
Caution:
Do not overtighten.
8. Key should turn freely in both counter clockwise and clockwise directions.
9. Resume with panic hardware instruction #15.
Fig. T3
Page 4
Advertising