Detex 02AN Trim - Manual (Page 4)

Continue with Exit
Hardware Instructions
Installing the Trim
7 8
Mark bottom hole
for thru bolt
(for 01 trims see
step number 8)
8-1/2"
For 01 trim
measure from the
device centerline
9
Once hole is
marked drill 3/8"
thru hole.
Fasten the top
of pull to the
trim plate using
screw provided
Position tailpiece vertically
when installing trim plate
10
Be sure to engage
cam to tailpiece
on mounting plate
Place trim unit onto
exterior door face.
Fasten mounting
plate to pullplate
Fasten bottom of
pull with PFH screw
(be sure to use
finished washer)
101324 Page 4
12
13
from Fig 1
L
C
11
03 Function
01 Function
03 function mounting
plate shown.
01 & 02 functions use
BP2 mounting plate