Dynojet WinPEP 7 - Manual (Page 112)

WinPEP 7 User Guide
A P P E N D I X A
Torque Cell Calibration
A-4
6 Click Next to continue.
The Span Calibration window will appear.
7 Select a torque cell from the drop down list.
8 Install the calibration arm and weights.
8a
Secure the calibration arm to the eddy current brake using the handle to
tighten the bolt.
8b Gently place the weights on the calibration arm.
Refer to one of the manuals from the list on page A-1 for more detailed
information on the calibration arm and weights.
The calibration weights are very heavy. The weights must be set on the arm
gently or you will damage the load cell.
Figure A-3: Span Calibration Window