EFCO S5500 Advanced - Manual (Page 11)

EFCO CORPORATION 6/2012 PART NO. Y557 11
Series 5500 Advanced & Alternate Installation Instructions
Section III: Alternate Anchorage Method
(Heavy-Duty Anchor Connections)
DROP-ON HEAD AND SILL
WITH ‘M’ AND ‘F’ ANCHORS
ANCHOR BOLTS (Type
and quantity as
required by conditions
and loads. See Shop
Drawings.)
SHEAR BLOCK
SHEAR BLOCK
‘M’ AND ‘F’
ANCHORS
‘M’ AND ‘F’
ANCHORS
Note: It is up to the responsible engineer to determine the structural
adequacy and type of anchorage method to be used for a given
substrate, applied loads, and building movements. The S-5500 has
different anchorage options available to meet these conditions.
Shim as required at
anchors and under
each vertical mullion.
(Shim under setting
blocks at heavy lites.)