EFCO Sliding Glass Door - Manual (Page 11)

EFCO CORPORATION 6/8/2012 PART NO. YW41 Page 11 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
3. Seal sliding door jambs to the building substrate. The seal joint along the jamb is to marry in
with the seal joint across the head.
4. Stuff access holes, fixed jamb side, with backer rod and seal over the access holes before
snapping on the cover (S-3005, S-3014 & S-3015).
Sealant
Sealant
Sealant
Fig. “H”
Blocking by
Erector
S-3001 Shown
S-2000/3000 Similar
High Impact Shim
by Erector
S-3005 Shown
S-3014 & 3015 Similar
High Impact Shim
by Erector
Access Hole
Erector to Field Drill
for Anchors and
Cover Anchors With
Sealant
Erector to Field
Drill for Anchors
Sealant