EFCO Sliding Glass Door - Manual (Page 57)

EFCO CORPORATION 6/8/2012 PART NO. YW41 Page 57 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
Locate and install the operable panel onto the sill track. Position the operable panel to one side of the
door. Locate 3880 head closure and install up into the head. Through existing holes in the head closure,
fasten STK5 tek screws (#10-16 x 3/4” PL-PH-SMS 410 tek). Move the operable panel to the other side of
the door and finish installing STK5 screws in the head.
Locate HV02 or HV03 operable panel stop and push up into the head next to the fixed jamb.
3880 Head
Closure
3887
Threshold
Operable Panel
STK5 Screws
HV02 Sash Stop or
HV03 (6” Length)