EFCO Sliding Glass Door - Manual (Page 14)

EFCO CORPORATION 6/8/2012 PART NO. YW41 Page 14 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
The opening is now ready to install the Sliding Glass Door frame.
(See assembly instructions for appropriate series on project)
4. Load the field assembled door frame into the anchored subframe. Snap-in the interior
subhead closure for all two-piece subhead applications. (Fig. K) Drive-in the continuous
silicone wedge between the doorframe and the interior subsill leg and cover wedge with
silicone. (Fig. L)
Fig. “M”
Sealant Over
Drive-In Dart
Compatible Silicone
Sealant by Others
Note:
All sealant, interior and exterior, to
marry one with another.
S-3001 Shown
S-2000 & S-3000 Similar
Compatible Silicone
Sealant by Others
Erector to Field
Drill for Anchors
Sealant
To ensure a
watertight seal,
silicone over the
continuous drive-
in wedge.
Fig. “L”
Fig. “K”
Snap-in
Closure
S-3001 Shown
All Other Series
are Similar