EFCO Sliding Glass Door - Manual (Page 54)

EFCO CORPORATION 6/8/2012 PART NO. YW41 Page 54 of 59
SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
Once the fixed panel is
installed, seal the meeting rail
to the frame, at this location.
Do this at the head and sill.
Locate 3499 jamb cover and snap-in place after
anchoring the jamb. (This can be done at anytime
after the door jambs are anchored.)
The 13/16” dimension must be maintained to ensure
proper embedment of the fixed panel; thereby,
ensuring proper interlock of the meeting rail.
13/16”