ETS-Lindgren 7606 Coil Antenna/Shielded Coil - Manual (Page 36)

E QUATION 13
The ratio |B/VL| is put in decibels by equation 14 to become the correction factor,
CF.
E QUATION 14
Sample Calculation:
The maximum uncertainty because of dimensional tolerances is ±0.06 dB;
therefore, this calculated correction factor has a range of 98.95 dB to 99.07 dB.
For ordinary measurement work, such as the measurements for RS101, it is
reasonable to round this correction factor to 99.0 dB.
36 | MIL-STD-462D Method RS101 Testing