ETS-Lindgren 7606 Coil Antenna/Shielded Coil - Manual (Page 7)

About This Manual
Numbers enclosed in square brackets correspond to the references
listed in References on page 11.
• This manual explains the theory of operation of the Model 7605
Radiating Loop and Model 7606 Radiating Sensor, and the use of the
set for MIL-STD-462D [1] electromagnetic interference (EMI) testing.
• The scope of this manual includes only the theory of operation,
calibration, and use of Model 7605 and Model 7606 for EMI testing in
accordance with Method RS101 [2] of MIL-STD-462D.
• The use of Model 7605 and Model 7606 for other purposes in
electromagnetic compatibility (EMC) testing is limited only by the
ingenuity of the user, but uses in addition to MIL-STD-462,
Method RS101 EMI testing are not included.
• The international system of units (SI) is used throughout this manual.
Refer to IEEE Std 268 [3] for correct abbreviations and their proper
use, and IEEE Std 260 [4] for the proper use of units with the decibel
symbol (dB).
• In general, definitions of EMC terms are contained in ANSI C63.14 [5]
and other electrical terms in IEEE Std 100 [6].
| vii