ETS-Lindgren SMART 1000 Mini-Reverb Cell - Manual (Page 18)

18 | Tuners
Installation Procedure for SMART 200 and
Larger Chambers
Before installing any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
Tuner installation steps are provided for both the S81 sandwich-type and
pan-type shields. The installation is similar with differences in the mounting
bracket assembly. The tuners may be installed during or after the completion of
the chamber installation. Access will be required on both the inner and outer
sides of the wall panels for the installation of the horizontal tuner.
Review the entire installation procedure before beginning.
Zero/home position