ETS-Lindgren 7000-001 EMCenter Modular RF Platform - Manual (Page 35)

www.ets-lindgren.com Remote Control of the EMCenter 35
If a card slot supports more than one device, the device ID is the slot number,
followed by the port number of that card slot. For example, using the previous
table:
 To access the second EMPower in slot 3: Use device ID number 3B.
 To access the EMLink in slot 2: Use device ID number 2.
Command Examples
E XAMPLE 1: R EQUEST D EVICE I DENTIFICATION
To request the identifier of the EMSwitch card in slot 1:
1:*IDN?
E XAMPLE 2: R EQUEST AN E-F IELD R EADING
To request an E-field reading from the EMSense card in slot 4
4:D2
E XAMPLE 3: R EQUEST A P OWER V ALUE
To request a power value from the EMPower sensor connected to port B of the
card in slot 3:
3B:POWER?