Archived 6/1/10, Series specific electrical specifications – ETS-Lindgren 94456 Current Probe (Archived) User Manual
Page 18
Specifications
MODEL 94456 CURRENT PROBES
14
© EMC TEST SYSTEMS, L.P. – MARCH 2002
REV B – PN 399265
SERIES SPECIFIC ELECTRICAL SPECIFICATIONS
Electrical
Specifications
91197-1
Frequency Range
10 kHz to 100 MHz
Transfer
Impedance
(Nominal)
0.006 Ohms
RF Current Range
(RF CW)
0 to 40 Amps
RF Current Range
(Pulse)
Pulse signals with peak currents to 4000
Amps can be measured if the pulse duty
cycle does not exceed:
(500 Amps I
P
) 0.0065 Duty
(1000 Amps I
P
) 0.0016 Duty
(2000 Amps I
P
) 0.0004 Duty
(3000 Amps I
P
) 0.00018 Duty
(4000 Amps I
P
) 0.0001 Duty
Maximum Power
Current
350 Amps at DC
250 Amps at 60 Hz
40 Amps at 400 Hz
Maximum Power
Voltage
No limitation, subject to adequate
conductor insulation.
Sensitivity Under
Rated Load
6 millivolts across a 50 Ohm load for a 1
ampere RF signal in the primary
Archived 6/1/10