Gastroback 41006 Design Mixer Advanced Pro - Manual (Page 12)

50 51
Abb I
The blade assembly housing and the sealing ring should be properly
connected to seal the bottom of the blender jug. Otherwise ingredients
will run right into the motorblock.
imPoRTAnT: Do not tighten the blade assembly housing with force
or too tight to avoid damaging the appliance or the sealing ring.
ATTenTion: Ensure the blender jug is leak-proof and that the blade
assembly housing and the sealing ring are in proper position and
firmly locked before putting the blender jug on the motorblock. Without
the blade assembly housing the bottom of the blender jug is open.
Spilled liquids might run right into the motor. Always wipe off spilled
liquids immediately. Never let any liquids run into the motorblock or
underneath it to avoid electric shock. When liquids are spilled on the
motor housing, immediately unplug the appliance and dry the motor
housing to avoid risk of electric shock or fire. Do not attempt to oper-
ate the appliance, when liquids are on or in the motor housing.
ATTenTion: Never place the holder or the blade assembly housing
only on the motorblock. Never touch the drive gear when the plug is
connected to the power outlet.
3. Place the proper assembled blender jug onto the motorblock. Turn the blender jug until it
locks onto the motorblock. The handle of the blender jug can be positioned to the left or the
right hand side of the appliance (picture I).
The motor will not start before the plug is plugged into the power outlet, the blender jug is
securely locked onto the motorblock, the appliance is switched ›On‹ (by pressing the Power
button) and a function is selected.
4. Place the clear inner lid onto the opening of the blender lid.
note: The inner lid has two small guiding pins that fit in the matching gaps of the lid. Twist it
until firmly locked into position (picture J). You can hear it click when the inner lid is in proper
position. You can turn it either clockwise or anticlockwise depending on how you placed the
inner lid into the opening of the lid.
5.
Load the blender jug with ingredients, select a function and start processing.
ATTenTion: Never try to sharpen the blade. Replace the blade if it is blunt. Please contact
our service department for the replacement part.
oPeRATing
Before first use
wARning:
The blade is very sharp. Pay attention when handling the blade. Only touch
the blade on the blade assembly housing. Do not leave young children play with the appli-
ance or any part of it or the packing material.
After unpacking, remove all promotional and packing materials as well as any foreign objects.
Before first use and after a long period of storage, clean the appliance and all its units with a
damp soft cloth and warm soapy water (see ›Care and cleaning‹). The blender jug, lid, inner
lid, blade assembly housing and silicon seal are dishwasher safe.
Abb J