Gastroback 41006 Design Mixer Advanced Pro - Manual (Page 16)

54 55
Directions for use
• The mixer proceeds fast and reliable when you add the ingredients one after the other in
small portions.
• The mixer processes within seconds. Avoid processing food longer then necessary.
• Always ensure the lid is closed before starting the motor to avoid spilling.
• You can add ingredients during the operation through the refill aperture. Never place your
face or hands over the opening.
• If the motor slows down using the Smoothie or Blend function use the Ice Auto Pulse func-
tion. With short bursts of power you can pre-process the food before blending them with the
other functions.
• Always clean the appliance right after use.
• If ingredients get stucked on the walls of the blender jug turn the appliance off, take the
blender jug off the motorblock, open the lid and push the food down carefully using a spatula.
Take care of the blade.
ATTenTion: Open the refill aperture when mixing warm food and cover it with a kitchen
towel. This way excess pressure and steam can escape.
Production steps
wARning:
ensure the blender jug is locked securely onto the motorblock
and that you can not knock the appliance over during operation to avoid
personal injury.
Connected the plug to the power outlet.
note: The motor wont start before the appliance is set into operational mode and a function
is selected.
1. If the appliance is properly assembled and securely locked onto the motorblock fill the
ingredients into the blender jug. Do not fill the blender jug above the ‘MAX’ line (2 litre).
imPoRTAnT: Food with hard texture should be cut in pieces of 2 cm size before filling them
into the blender jug. Fill liquids in first. Do not overload the blender jug to avoid spilling or
overloading the motor.
2. Place the lid on the blender jug and press the lid down to seal the top of the blender jug.
Close the opening of the lid with the inner lid.
note: The blender features a patented assist lid. This allows the lid to fit tightly onto the
blender jug, avoiding displacement during operation. The ring pull design allows the user to
easily remove the lid with a simple leverage action.
wARning: Never take the blender jug off the motorblock, the lid of the blender jug or
place a spoon or other foreign substance into the blender jug while the motor is running.
Always turn the appliance ›Off‹ first and wait for the motor to stop moving. Now you can take
the blender jug off the motorblock remove the lid and check on the ingredients.
wARning: Do not fill ingredients into the blender jug which exceed a temperature of
60 degrees. After processing ice cubes slowly heat up the blender jug before processing hot
ingredients. Otherwise the blender jug will crack or gets damaged. Use gloves processing hot