Other settings, Language selection, Reset setting – Canon 320 User Manual

Page 37

Advertising
background image

34

Changing the Printer Settings

Other settings

„

Date display

Changes the display format of shooting dates when printed.

„

Read/write attribute

Selects whether to allow data to be written onto memory cards from a computer.

„

Slide show setting

Selects Image quality: Standard or Image quality: High for the image display
quality of the slide show.

Language selection

Changes the language for LCD messages and menus.

Reset setting

You can change the settings back to the default, except for the LCD language and
the position of the Print Head.

Note

z

When Date ON is selected on the advanced print settings screen, the shooting

date is printed in the date display format you selected. For print setting, see

“Advanced Print Settings Screen” on page 15.

z

The shooting date format is as specified in the DPOF setting from DPOF

printing.

Important

z

Remove the memory card before changing this setting. For details, refer to the

User’s Guide on-screen manual.

z

When you write the data on the memory card, connect the printer with the AC

adapter. The printer cannot be set to the Read/write mode with using the

optional battery. The printer can be set to the Read/write mode when using

both the AC adapter and optional battery, but do not remove the AC adapter

when you write the data on the memory card.

z

If you set this setting to Read/write mode, card direct printing cannot be done.

After you finish operation of the memory card dedicated drive, be sure to set it

back to Read-only mode. And also, when you turn off the printer, the Read/

write mode will be canceled and the setting is returned to the Read-only

mode when you turn on the printer next time.

Note

When Image quality: High is selected, it may take time until images are

displayed.

Advertising