Canon 320 - Manual (Page 6)

3 Printer Parts and Their Functions
Printer Parts and Their Functions
Main Components
Printer Cover
Open by sliding the Lock Switch to
replace the ink tank or remove
jammed paper.
„ Front View
Paper Feed Tray
Open and fold in half before printing
to support paper.
Paper Guide
Slide against the left side of the
paper stack to support paper so that
it feeds properly.
Operation Panel
Changes the settings and operates
the printer. See “Operation Panel” on
page 5.
Card Slot
Set the memory card here. See “Using the
Memory Card” on page 10.
Access lamp
Lights or flashes to indicate the status of
the memory card. See “Inserting the
Memory Card” on page 11.
IrDA Port
Use this port to perform wireless printing
through infrared communication. See
“Printing Photographs from a Wireless
Communication Device” on page 25.
Direct Print Port
Connect your PictBridge compliant
device, such as a digital camera, here to
print directly from it. See “Printing
Photographs Directly from a Compliant
Device” on page 21.
You can also connect the Bluetooth Unit
BU-20* to perform wireless printing
through Bluetooth communication. For
details, refer to the User’s Guide on-
screen manual.
Rear Tray
Load paper here.
LCD Monitor
Displays menus, setting items, and
photos for printing. For information on
Screen-saver mode, see “Screen-
saver mode” on page 7.
Lock Switch
Slide to the right to open the Printer
Cover.
*The Bluetooth unit is not available in some countries or regions depending on the local laws and regulations. For details, contact your local Canon Service representative.
USB Connector (for computer)
Plug in the USB cable connecting the
printer to a computer here.
Open button
Press to open the Paper Feed Tray
and Paper Output Tray.
Paper Output Tray
The printed paper will be ejected.