Canon 320 User Manual
Page 7
4
Printer Parts and Their Functions
Battery Connector Cover
Remove each cover to attach the
optional Portable Kit. To attach the
optional Portable Kit, refer to the
instruction manual provided with the
Portable Kit.
Rear View
Carrying Handle
Pull out this handle to carry
the printer.
AC Adapter Connector
Connector used to connect the
supplied AC Adapter plug.
Note
For information on how to install the ink tank, refer to your setup sheet.
Interior
Print Head Lock Lever
Locks the Print Head.
Important
Do not pull this lever up.
If you have accidentally pulled
them up, adjust the print head
position.
See “Aligning the Print Head” on
page 29.
Paper Thickness Lever
Move to the right when printing.
Move to the left if ink smudges or
the printed surface is stained.
Return to the right after printing.
See “The Paper Thickness Lever
position is incorrect.” on page 42.
Print Head Holder
The print head is installed in
advance.
Ink lamp
Lights or flashes red to
indicate the status of the ink
tank.
See “Replacing an Ink
Tank” on page 31.