General Hydroponics PowerGrower 8-Pack - Manual (Page 4)

ASSEMBLY ASSEMBLY
STEP 10
Push the entire drip ring assembly down
into the pumping column support tubes.
Being careful not to catch the tube clamps
on the support tube. Push the assembly
into the tubes until they barely touch the
bottom of the reservoir.
STEP 9
Attach a Drip Ring (part 9) to the end of
each Pumping Column Assembly (part
11). Ensure that the holes in the ring itself
are facing downwards.
STEP 8
Push the beveled end of the
Support Tubes (part 11) into the
large hole in the bottom of the
Growing Chambers. Push the PVC
pipe down until it barely touches
the bottom of the reservoir.
STEP 6
The individual growing units
can be arranged in a compact
honeycomb design or all 8 can be
used in two rows (See Diagrams
in Step 12). If you choose the
compact honeycomb design, set
one of the Individual Reservoirs
(part 16) aside to be used in
assembling a stand alone unit.
Insert a Split Tee (part 14) into
the 1” grommet for each of the
remaining Individual Reservoirs .
STEP 7
Place the Growing Chambers
(part 17) on the remaining
Individual Reservoirs.
STEP 11
Move drip ring out of way and fill growing
chamber with rinsed clay pellets or your
favorite growing media.