Hybrid Racing HR 05-06 Immobilizer Delete - Manual (Page 2)

2
Install Guide
STEP 1:
Using a Phillips head screwdriv-
er, remove the (4) screws holding
cover panel on the ECU. (FIG 1)
STEP 2:
Again, using a Phillips head
screwdriver, remove the (2)
screws shown in FIG 2. NOTE:
This is also a good time to use
some carb and choke cleaner to
clean the contact points circled.
STEP 3:
Place the (2) plastic spacers pro-
vided over the two wholes onto
the motherboard as shown in FIG
3.