JDC Electronic SA Skywatch Aero - Manual (Page 10)

The user can define a station position so as to differentiate
between the stations. This information will be recorded during
downloading to the CSV file. To assign a location to a station,
select the latter from the list set up by the user, then press
“Update”.
To add a location to the list, press on “Add”. The “Localization”
window opens. Enter the new location in the field prepared for
this then press on “Add”.
To delete a location from the list, select the location and press
on “Remove”.
Memory
This is the station memory. The memory level indicates the percentage of the memory
used by the measurements. The measurements can be changed and saved in a CSV file.
Afterwards the memory can be deleted.
Real time viewing
When the measurement process is active, the user can view the readings in real time in
the “Real time display” tab. Readings along with a graphic for each of the parameters
are then available for viewing.
Localization
10