JDC Electronic SA Skywatch Aero User Manual
Page 12
Advertising
Rear blade cutting edge
Installation guide
1
2
3
Place blades horizontally, then firmly
screw in propeller nose to lock the
blades.
Fit anti-radiation shade to the transmitter
lower part. Gently push in shade until
tube touches anti-radiation shade
protection grid
Place propeller with its axis
vertical and lock it in the throat
using 2.3mm circlips and flat
pliers.
Retighten metal plug.
1
2
3
1
2
3
Fixing arms
Mast
Step 1 - Fitting transmitter
12
The transmitter should be placed as far as possible from any obstacles
that could disturb air flow, such as the roof of a house, for example.
Ideally the transmitter should be fixed on a horizontal arm using two
holes M4 or four holes 5.5mm dia, and the arm then fixed to a mast.
Step 2 - Installing transmitter
Advertising