Recording measurements, Meteorological measurements, 5general description of operation – JDC Electronic SA Skywatch Aero User Manual
Page 5: Clock and synchronization
GB
Recording measurements
All measurements are saved in the station memory. They can be downloaded to a PC
using the USB port and then automatically saved in a CSV file.
Meteorological measurements
The SKYWATCH AERO station takes windspeed and direction (as an option) measurements
every second. Temperature, humidity and pressure (as options) are measured once per
cycle. The time for calculating the average is adjustable using the SKYWATCH AEROlog
software.
5
General description of operation
This meteorological station can measure the following parameters:
• Maximum, minimum and average windspeeds
• Maximum, minimum and average wind directions (as an option)
• Temperature and humidity (as an option)
• Pressure (as an option)
The station, powered by two LR6 batteries, can be easily installed at isolated sites and
in extreme conditions.
The starting and stopping of the measurement process can be done via the SKYWATCH
AEROlog software using the button to be found in the remote control box.
An LED on the control box indicates the system status. Its flashing indicates that the
system is taking measurements.
Clock and synchronization
The station has an internal clock that allows measurements to be time stamped.