14 step 6 - station states, Step 5 - wiring up remote box (as an option) – JDC Electronic SA Skywatch Aero User Manual
Page 14
14
Step 6 - Station states
The remote box has a red LED that gives information on the station condition:
LED condition
Measurements
Battery level
No light
Stopped
Good
Flashing once every 3 seconds
Running
Good
Flashing twice every 10 seconds
Running
Medium
Flashing 3 times every 30 seconds
Stopped
Low
This operation is reserved for personnel who have a basic knowledge of
electricity. The cable of the remote box can be removed so as to shorten it or
to pass it through a hole.
Batteries must be removed before changing the cable.
To carry out such a modification, take out the leads by unscrewing them from
the terminal box and then, following modification of the length or passage of
the cable through a hole, reconnect leads in the following order:
• Terminal n°1
white + screening
• Terminal n°2
brown
• Terminal n°3
green
• Terminal n°4
yellow
• Terminal n°5
grey
• Terminal n°6
pink
• Terminal n°7
blue
This modification causes the lost of the product warranty.
Step 5 - Wiring up remote box (as an option)