Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 13)

6 — LOAD
To open or close the display, push the LOAD button
located on the faceplate.
After opening the display, it takes a few seconds to eject
a CD/DVD, if one was in the slot.
When inserting a disc, make sure the label is facing up.
The display will close automatically after inserting the
disc.
NOTE:
It may take several seconds to recognize the type
of inserted disc (CD, DVD, MP3, etc.).
7 — MENU
Push the MENU button on the faceplate (7) to access the
system settings menu.
NOTE:
Push the MENU button on the faceplate in an
active mode to change mode specific settings.
8 — AUDIO
Push the AUDIO button located on the faceplate to access
the speaker balance/fade and tone controls.
9 — MY FILES
Push the MY FILES button located on the faceplate to
manage your music and picture files on the internal
storage drive.
10 — USB Connector
Connect a supported device into the USB Connector (10)
to play music and to copy music and picture files to the
internal hard disk drive.
NOTE:
See the USB Connector section of this manual for
information on supported devices.
11 — AUX Input (Audio Jack)
Connect an external audio device into the AUX Input (11)
(e.g., MP3 player, video-game) to play the device audio
through the car audio system.
12 GENERAL HANDLING