Change the language, Set the time — uconnect® 430 – Ram Trucks UCONNECT 430 for Chrysler User Manual
Page 19
Advertising
![background image](/manuals/637428/19/background.png)
CHANGE THE LANGUAGE
The radio will conform to the vehicle language set in the
Electronic Vehicle Information Center (EVIC), if
equipped.
If you change the language in the radio, the vehicle will
change the language for all display information. Refer to
the vehicle’s Owner’s Manual on the DVD.
To change the language with the radio:
1. Push the MENU button on the right side of the radio.
2. Then press the “System Setup” button to get to the
System Setup menu.
3. Press the “Language Setup” button and select a lan-
guage.
4. Press the SAVE button to activate the new language
selection.
SET THE TIME — Uconnect® 430
1. Press the “Time” display in the lower left corner of the
screen.
2. Adjust the hours and minutes using the “Up and
Down” buttons.
18 GETTING STARTED
Advertising
This manual is related to the following products: