Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 71)

Availability of the DVD Player, Rear AUX 1 and the Rear
AUX 2 buttons are based on the type of VES™ in the
vehicle.
DVD Player is not available if there is no DVD player in
the VES™ or there is no DVD in the player.
A device must be plugged into the AUX jack of the VES™
to be available.
A disabled button indicates an unavailable source.
Sending Audio/Video And Controlling The VES™
The radio can also control the VES™.
All sources are played through the VES™ headphones.
Refer to the “Uconnect® Multimedia/VES™” section of
the Owner’s Manual on the DVD for additional details.
To access the rear VES™, push the MENU button located
on the faceplate on the right side of the radio.
Press the Rear VES™ button to display the Rear VES™
Controls.
The Rear VES™ Controls are displayed on the right half
of the screen.
NOTE:
Press the HIDE LIST button and/or the CLOSE
INFO button if you cannot see the Rear VES™ Controls.
The first column controls VES™ ON/OFF and the head-
set audio channels 1 or 2.
A VES™ headset can listen to either audio Channel 1 or
audio Channel 2.
Press the button tab 1 to select Channel 1.
The left half of the screen displays the audio source
information. If FM was chosen for example, a radio
frequency such as 93.1 MHz would be displayed.
70 Uconnect® MULTIMEDIA (REMOTE DEVICES)